NIST Request

Winland Electronics, Inc. 9 NIST Request

Calibration Probe Request

Winland is now able to deliver Calibrated probes at this time.

If you run into any difficulties, request a feature, or would like to give us feed back, please let us know at tech.support@winland.com

Winland Calibrated Sensors

TEMP-L-S "Blue Range" (-50 °C to 70 °C / -58 °F to 158 °F)

Default Setpoints: -13.0 °F,  14.0 °F, 32.0 °F, 50.0 °F, 86.0 °F // -25.0 °C, -10.0 °C, 0.0 °C, 10.0 °C, 30.0 °C

If you would like to adjust, please state in the notes at the end of the form. Additional charges may apply.

TEMP-L-W "Blue Range" (-50 °C to 70 °C / -58 °F to 158 °F)

Default Setpoints: -13.0 °F,  14.0 °F, 32.0 °F, 50.0 °F, 86.0 °F // -25.0 °C, -10.0 °C, 0.0 °C, 10.0 °C, 30.0 °C

If you would like to adjust, please state in the notes at the end of the form. Additional charges may apply.

TEMP-UL-S "White Range" (-100 °C to 0 °C / -148 °F to 32 °F)

Default Setpoints:  -112.0 °F, -103 °F, -58.0 °F, -31.0 °F, 14.0 °F // -80.0 °C, -75.0 °C, -50.0 °C, -35.0 °C, -10.0 °C

If you would like to adjust, please state in the notes at the end of the form. Additional charges may apply.

HA-4 (5% to 95%)

Setpoints: 25%, 50%, 75%

Setpoints cannot be adjusted.

EAPro-WHS (5% to 95%)

Set Points: 25%, 50%, 75%

Setpoints cannot be adjusted.

EAPro-WTS (32 °F to 122 °F (0 °C to 50 °C))

Set Points:  50 °F, 77 °F, 104 °F // 10 °C, 25 °C, 40 °C

Setpoints cannot be adjusted.