EnviroAlert ® Accessories

Critical-Environment Monitoring Sensors

Whether it is an industrial, commercial, or residential application, Winland provides the flexibility to simultaneously monitor temperature, humidity, and/or water presence in critical environments. Additional 4-20 mA sensors may be used to monitor additional environmental conditions including conditions like pressure, air flow, critical gases and more.

Temperature Sensors

EnviroAlert thermistor sensors are designed for specific temperature ranges. When purchasing, pay attention to sensor parameters for proper device functionality. Sensors may be extended up to 1000′ (305 m) from the device using 22 AWG twisted pair wiring.

Temperature Sensors EA800- ip EA400 EA200
 0081coilTEMP-H-S High Temperature Range Sensor – Stainless Steel (Red)
Range: 32 to 302°F (0 to 150°C)
Dimensions: 3.65 x .25” (92.7 x 6.4 mm)
Cable Lead: 23”
TEMP-H-S Spec Sheet
Temp-H-W_Temperature_Sensor  TEMP-H-W High Temperature Range Sensor – Waterproof (Red)
Range:  32° to 221° F (0° to 105° C)
Sensor Diameter:  .3” (7.6 mm)
Cable Lead: 38” (.96 m) [extend up to 1,000’ (305 m)
using 22 AWG twisted pair]
TEMP-H-W Spec Sheet
Temp-L-S_01TEMP-L-S Low Temperature Range Sensor –  Stainless Steel (Blue)
Sensor Diameter .3” (7.62 mm)
Cable Lead 38” (.96 m) [extend up to 1,000’
(305 m) using 22 AWG twisted pair] -58 to 158°F (-50 to 70°C)
TEMP-L-S Spec Sheet
TEMP-L-WTEMP-L-W Low Temperature Range Sensor – Waterproof (Blue)
Range: -58 to 158°F (-50 to 70°C)
Dimensions: 3.65 x .25” (92.7 x 6.4 mm)
Cable Lead: 38”
TEMP-L-W Spec Sheet
Temp-UL-STEMP-UL-S Ultra-Low Temperature Range Sensor – Stainless Steel (White)
Range: -148 to +32° F (-100 to 0° C)
or  -112 to 32°F (-80 to 0°C) with EA-WMFS
Dimensions: 3.65 x .25” (92.7 x 6.4 mm)
Cable Lead: 23”
TEMP-UL-S Spec Sheet
   

Water Detection Sensors

Water detection sensors do not send false alarms due to high condensation. Sensors may be extended up to 1000′ (305 m) from the console using 22 AWG twisted pair wiring.

Water Detection Sensors EA800-ip EA400 EA200
W-S-S Surface Sensor – Supervised
Dimensions: 3.0 x 2.0 x .88” (76.2 x 50.8 x 22.35 mm)
Cable Length: 15’ (4.5 m)
W-S-S Spec Sheet
W-UC-S_Water_Detection_Sensor_SupervisedW-UC-S Under Carpet Style – Supervised
Dimensions: 3.0 x 2.0 x .18” (76.2 x 50.8 x 4.57 mm)
Cable Length: 15’ (4.5 m)
W-UC-S Spec Sheet

Humidity Sensor

Humidity sensors may be extended up to 1000′ (305 m) from the device using 22 AWG twisted pair wiring. NOT for use in cooler or freezer.

Humidity Sensors EA800-ip EA400 EA200
HA-III+_Electronic_Humidity_SensorHA-III+ Power Requirements: 12 VDC @ 5mA
Sensing Range: 5-95% RH ±5% @ 10-90% RH, 77° F (25° C)
Operating Temp: 32F to 122 F (0C to 50C)
Dimensions: 3 x 2 x 1.75” (7.6 x 5.08 x 4.45 cm)
For use in non-condensing environments such as an office
or IT room. NOT for use in cooler or freezer.
HA-III+ Spec Sheet
HA-III+ Manual

Wireless Sensors

NOTICE: The Wireless sensors listed below are not compatible with the EAPro®-Gateway Wireless sensors can be used with the EA800-ip and have an operating range 45′ to 100′ indoor (results may vary).

Wireless Sensors EA800-ip EA400 EA200
EA-WTS Temperature Range Sensor
Sensing Range:  32° to 122° F (0° to 50° C)
Dimensions:  3.67 x 2.65 x 1.17” (9.3 x 6.7 x 2.9 cm)
EA-WTS Spec Sheet
   
EA-WTS_Wireless_Temperature_SensorEA-WHS Wireless Humidity Sensor
Range:  5% to 95% R.H. ±5% @ 10-90% RH, 77° F
Dimensions:  3.67 x 2.65 x 1.17” (9.3 x 6.7 x 2.9 cm)
EA-WHS Spec Sheet

   
EA-WHS_Wireless_Humidity_SensorEA-WMFS DISCONTINUED  

Wireless Multi-Function
Remote sensor dependent – requires remote sensor for operation.
Unit Operating Range:  32° to 122° F (0° to 50° C)
Non-condensing environment.
Dimensions:  3.67 x 2.65 x 1.17” (9.3 x 6.7 x 2.9 cm)
EA-WMFS Spec Sheet

     

Other Accessories

EA800-ip EA400 EA200
TEMP-P-H_02TEMP-P-H Temp Sensor Probe Housing
(Accepts one TEMP-L-W or TEMP-H-W probe only)
TEMP-P-H Spec Sheet
TEMP-B-T 40ml Glass Tube and Grommet Cap (Temp Probe Buffer Kit)
TEMP-B-T Spec Sheet
TEMP-B-T Manual 
TEMP-G-BTEMP-G-B 6 oz Bottle of Glycerin and Grommet Cap (Temp Probe Buffer Kit)
TEMP-G-B Spec Sheet
TEMP-G-B Manual 
TEMP-T-S-z-thick-line TEMP-T-S Tube and Z-Stand (Temp Probe Buffer Kit – glycerin not included)
(Accepts one TEMP-L-S or TEMP-H-S probe only)
TEMP-T-S Spec Sheet
TEMP-T-S Manual
Cable-with-clampsTEMP-S-K Temp Probe Flat Cable Splice Kit – 5′ (1.53 m)
(Minimizes cooler/freezer door gasket impact)
TEMP-S-K Spec Sheet
TEMP-S-K Manual
EA-TBK-02EA-TBK Terminal Block Kit
EA-TBK Spec Sheet
12VDCT   12VDCT 12V DC Transformer (Power Supply)
12VDCT Spec Sheet