WBTX-319 and WBTX-345

Winland Electronics, Inc 9 Product 9 Monitoring Devices 9 WaterBug® 9 WBTX-319 and WBTX-345

Note: WBTX – 345 has been discontinued.

The Wireless WaterBug® Sensor is a water detection device ideal for computer rooms, document storage areas, warehouses, sump pumps and basements. Wireless sensors activate the alarm when a conductive bridge is formed between 2 contacts. The WBTX will effortlessly protect your most valuable assets from water damage!

Features

  • Water Detection when liquid makes contact with probe
  • Contacts above floor level to prevent false floor condensation detection
  • Checks for water constantly, requires two positive checks for a valid alarm
  • Wireless sensors are available in 319MHz and 345MHz
WaterBug®
  • WB200
  • WB350
  • WBTX-319 and WBTX-345
  • Accessories

    • Product Specifications

    Power Requirements Batteries – replace battery with exact replacement every 5 years with a 3V Lithium (x2)
    Wireless Signal Range 600 ft (200M), open air
    Code Outputs 319.5 MHz or 345 MHz
    Supervisory keep-alive interval 70 minutes
    RF Peak field strength Typical 36000 uV/m at 3m
    Operating Temperature 32° to 122°F (0° to 50°C)
    Storage Temperature -40° to 140°F (-40° to 60°C)
    Transmitter Dimensions 2.5” H x 1” W x .5” D
    Max cable length 72″
    Package Weight 158 lbs.
    Mounting Mount to wall surfaces (vertical) as well as floor surfaces (horizontal) using screws or adhesive tape included.
    Case Material Mount to wall surfaces (vertical) as well as floor surfaces (horizontal) using screws or adhesive tape included.
    Warranty 1 Year Limited
    Spec Sheet for WBTX-319 and WBTX-345 Wireless WaterBug Sell Sheet Quick Start Guide 319 Quick Start Guide 345 WBTX Installation Instructions Prop 65 Notice for Californians